MTS Technik

MTS Technik koiloveri Stance Gold with front camber plates - Volkswagen BORA Variant (1J6) (FWD)

Name: MTS Technik koiloveri Stance Gold with front camber plates - Volkswagen BORA Variant (1J6) (FWD)
Brand: MTS Technik
SKU: MTSGWVW87-S
Price: 849.00 EUR
Availability: InStock

KODS :MTSGWVW87-S

€849,00 EUR

Akcija Nav noliktavā, raksti siadkracing@gmail.com, lai pasūtītu.

ar PVN. Piegāde tiek aprēķināta apmaksas laikā

MTS Technik Stance coilover kit with Gold housing, with front camber plates, for Volkswagen BORA Variant (1J6).

SeriesStance

HousingGold

Camber platesfront

Lowering front30 - 80 mm

Lowering rear25 - 75 mm

TÜVno

Specifications

Part number	MTSGWVW87-S
Series	Stance
Housing	Gold
Camber plates / top mounts	Front camber plates
Lowering front	30 - 80 mm
Lowering rear	25 - 75 mm
Max. axle load front?	max 1020 kg
Max. axle load rear?	max 1080 kg
Main spring rate	GWFE81 (80 N/mm) GWFE86 (60 N/mm)
Helper spring rate	GWHE02 (20 N/mm)
TÜV certificate	no

Vehicle fitment

This product fits every vehicle listed below.

?How to check the axle loads of your car

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine	Years · power · drive
1.4 16V / 1.6 / 1.6 16V / 1.6 FSI / 1.8 T / 1.9 TDI / 2.0 / 2.3 V5	05/99 - 05/05 55 - 132 kW / 75 - 180 HP FWD

Features

Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.

Anti-corrosion protection yellow galvanizedDouble zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.

Top mounts with camber adjustmentThe camber plates allow the wheel angle adjustment and increase the precision of driving.

2 years warranty2 year warranty with no mileage limit to confirm high quality.

hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.

Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

5Stabilizer bars may need to be changed with longer ones if lowering more than 40mm.

6If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.

8Not for 4x4.

21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.