• MTS Technik koiloveri Stance Inox - Volkswagen JETTA IV (16/AV)
  • MTS Technik koiloveri Stance Inox - Volkswagen JETTA IV (16/AV)
1 2

MTS Technik

MTS Technik koiloveri Stance Inox - Volkswagen JETTA IV (16/AV)

MTS Technik koiloveri Stance Inox - Volkswagen JETTA IV (16/AV)

XMTSGWVW30-S

€699,00 EUR
€699,00 EUR
Akcija Nav noliktavā, raksti siadkracing@gmail.com, lai pasūtītu.
ar PVN. Piegāde tiek aprēķināta apmaksas laikā
Front axle load

MTS Technik Stance coilover kit with Inox housing for Volkswagen JETTA IV (16/AV).

SeriesStance
HousingInox
Camber platesno
Lowering front35 - 70 mm
Lowering rear35 - 60 mm
TÜVyes

Specifications

Series Stance
Housing Inox
Camber plates / top mounts Without
Lowering front 35 - 70 mm
Lowering rear 35 - 60 mm
Max. axle load rear? max 1150 kg
Helper spring rate GWHE02 (20 N/mm)
TÜV certificate yes

Versions

Part number Front axle load Main spring rate
XMTSGWVW30-S max 1035 kg GWFE27VA-01 (34 - 40 - 70 N/mm)
GWFE81 (80 N/mm)
XMTSGWVW31-S 1036-1170 kg GWFE249VA (42,5 - 75 N/mm)
GWFE81 (80 N/mm)

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Front axle load — the permissible axle loads are on the rating plate of your car.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
1.2 TSI / 1.2 TSI 16V / 1.4 TSI / 1.6 / 1.6 MPi / 1.6 TDI / 1.8 TSI / 2.0 / 2.0 TDI / 2.0 TFSI / 2.0 TSI / 2.5
 01/08 - 12/19
63 - 155 kW / 86 - 211 HP
FWD

Features

Eibach springs
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Stainless steel threaded shock absorbers.Stainless steel threaded shock absorbers.
2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perch
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Twin-tube construction
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technology
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
25In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
35Rear thread adjustment block is mounted on the top.
39Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.

Downloads

For all versions

For each version

Part number · Front axle load Documents for this version
XMTSGWVW30-Smax 1035 kg
PDFSpare part list
XMTSGWVW31-S1036-1170 kg
PDFSpare part list
Skatīt pilnu informāciju