MTS Technik
MTS Technik koiloveri Street Gold - Audi A6 C7 / A7 Sportback (4G)
MTS Technik koiloveri Street Gold - Audi A6 C7 / A7 Sportback (4G)
KODS :MTSGWAU23
Parastā cena
€699,00 EUR
Parastā cena
Pārdošanas cena
€699,00 EUR
ar PVN.
Piegāde tiek aprēķināta apmaksas laikā
Daudzums
Nevarēja ielādēt saņemšanas pieejamību
MTS Technik Street coilover kit with Gold housing for Audi A6 C7 / A7 Sportback (4G).
SeriesStreet
HousingGold
Camber platesno
Lowering front35 - 65 mm
Lowering rear35 - 60 mm
TÜVyes
Specifications
| Part number | MTSGWAU23 |
| Series | Street |
| Housing | Gold |
| Camber plates / top mounts | Without |
| Lowering front | 35 - 65 mm |
| Lowering rear | 35 - 60 mm |
| Main spring rate | GWFE30VA (120 N/mm) GWFE55HA (28 - 55 N/mm) |
| Helper spring rate | GWHE01 (20 N/mm) |
| TÜV certificate | yes |
Vehicle fitment
This product fits every vehicle listed below.
?How to check the axle loads of your car
Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.
| Vehicle / engine | Years · power · drive | Max. axle load? |
|---|---|---|
A6 C7 (4G)1.8 TFSI / 2.0 TDI / 2.0 TFSI / 2.8 FSI / 3.0 TDI
|
11/10 - 11/19 100 - 185 kW / 136 - 252 HP FWD |
front 1171-1320 kg rear max 1320 kg |
A6 C7 (4G)2.0 TDI quattro / 2.0 TFSI quattro / 2.8 FSI quattro / 3.0 TDI quattro / 3.0 TFSI quattro / 3.0 TFSI QUATTRO
|
11/10 - 11/19 140 - 250 kW / 190 - 340 HP AWD |
front 1171-1320 kg rear max 1320 kg |
A7 Sportback (4G)1.8 35 TFSI / 1.8 TFSI / 2.0 40 TFSI / 2.0 TFSI / 2.5 FSI / 2.8 FSI / 3.0 TDI
|
07/10 - 11/19 140 - 185 kW / 190 - 252 HP FWD |
front max 1295 kg rear max 1340 kg |
A7 Sportback (4G)2.0 40 TFSI quattro / 2.0 TFSI quattro / 2.8 FSI quattro / 3.0 50 TFSI quattro / 3.0 TDI quattro / 3.0 TFSI quattro / 3.0 TFSI QUATTRO
|
07/10 - 11/19 140 - 250 kW / 190 - 340 HP AWD |
front max 1295 kg rear max 1340 kg |
Features
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Anti-corrosion protection yellow galvanizedDouble zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.
Product notes
3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
35Rear thread adjustment block is mounted on the top.
39Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.
Downloads
