• MTS Technik koiloveri Street Gold - Mercedes-Benz E-CLASS Coupe (C207)
  • MTS Technik koiloveri Street Gold - Mercedes-Benz E-CLASS Coupe (C207)
1 2

MTS Technik

MTS Technik koiloveri Street Gold - Mercedes-Benz E-CLASS Coupe (C207)

MTS Technik koiloveri Street Gold - Mercedes-Benz E-CLASS Coupe (C207)

MTSGWMB04

€749,00 EUR
€749,00 EUR
Akcija Nav noliktavā, raksti siadkracing@gmail.com, lai pasūtītu.
ar PVN. Piegāde tiek aprēķināta apmaksas laikā
Front axle load

MTS Technik Street coilover kit with Gold housing for Mercedes-Benz E-CLASS Coupe (C207).

SeriesStreet
HousingGold
Camber platesno
Lowering front15 - 45 mm
Lowering rear15 - 55 mm
TÜVyes

Specifications

Series Street
Housing Gold
Camber plates / top mounts Without
Lowering front 15 - 45 mm
Lowering rear 15 - 55 mm
Max. axle load rear? max 1245 kg
TÜV certificate yes

Versions

Part number Front axle load Main spring rate
MTSGWMB04 max 1050 kg GWFE65VA (42 N/mm)
GWFE62HA (85 - 95 N/mm)
MTSGWMB05 1051-1145 kg GWFE66VA (50 N/mm)
GWFE62HA (85 - 95 N/mm)

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Front axle load — the permissible axle loads are on the rating plate of your car.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
E 200 (207.334) / E 200 CGI (207.348) / E 220 BlueTEC (207.301) / E 220 CDI (207.302) / E 220 CDI / d (207.302, 207.301) / E 250 (207.336) / E 250 CDI / BlueTEC / d (207.303, 207.304) / E 250 CGI (207.347) / E 300 (207.355) / E 320 (207.362) / E 350 (207.356) / E 350 (207.359) / E 350 BlueTEC (207.326) / E 350 BlueTEC / d (207.326) / E 350 CDI (207.322) / E 350 CDI (207.323) / E 350 CGI (207.357) / E 400 (207.361) / E 400 (207.365) / E 500 (207.372) / E 500 (207.373)
 01/09 - 12/16
120 - 300 kW / 163 - 408 HP
RWD

Features

Eibach springs
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Anti-corrosion protection yellow galvanized
Anti-corrosion protection yellow galvanizedDouble zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
Twin-tube construction
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technology
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
17Only for vehicles without electronic damping.
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
35Rear thread adjustment block is mounted on the top.
73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.

Downloads

For all versions

For each version

Part number · Front axle load Documents for this version
MTSGWMB04max 1050 kg
PDFSpare part list
MTSGWMB051051-1145 kg
PDFSpare part list
Skatīt pilnu informāciju