MTS Technik

MTS Technik koiloveri Street Inox - Volkswagen PASSAT B5.5 (3B3) (FWD)

KODS :XMTSGWAU38

€849,00 EUR

Akcija Nav noliktavā, raksti siadkracing@gmail.com, lai pasūtītu.

ar PVN. Piegāde tiek aprēķināta apmaksas laikā

Front axle load max 1100 kg 1101-1200 kg

MTS Technik Street coilover kit with Inox housing for Volkswagen PASSAT B5.5 (3B3).

SeriesStreet

HousingInox

Camber platesno

Lowering front25 - 70 mm

Lowering rear25 - 70 mm

TÜVyes

Specifications

Series	Street
Housing	Inox
Camber plates / top mounts	Without
Lowering front	25 - 70 mm
Lowering rear	25 - 70 mm
Max. axle load rear?	max 1080 kg
Helper spring rate	GWHE01 (20 N/mm)
TÜV certificate	yes

Versions

Part number	Front axle load	Main spring rate
XMTSGWAU38	max 1100 kg	GWFE10VA (122 N/mm) GWFE04HA (40,2 - 74,8 N/mm)
XMTSGWAU39	1101-1200 kg	GWFE24VA (150 N/mm) GWFE04HA (40,2 - 74,8 N/mm)

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Front axle load — the permissible axle loads are on the rating plate of your car.

?How to check the axle loads of your car

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine	Years · power · drive
1.6 / 1.8 T / 1.8 T 20V / 1.9 TDI / 2.0 / 2.0 TDI / 2.3 V5 / 2.5 TDI / 2.8	10/00 - 12/05 74 - 142 kW / 101 - 193 HP FWD

Features

Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.

Stainless steel threaded shock absorbers.Stainless steel threaded shock absorbers.

2 years warranty2 year warranty with no mileage limit to confirm high quality.

hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.

Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

8Not for 4x4.

17Only for vehicles without electronic damping.

21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

35Rear thread adjustment block is mounted on the top.

73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.

Downloads

For all versions

PDFInstallation manual PDFTÜV Certificate

For each version

Part number · Front axle load	Documents for this version
XMTSGWAU38max 1100 kg	PDFSpare part list
XMTSGWAU391101-1200 kg	PDFSpare part list

Skatīt pilnu informāciju

Prece pievienota jūsu grozam

MTS Technik koiloveri Street Inox - Volkswagen PASSAT B5.5 (3B3) (FWD)