• MTS Technik koiloveri Street Inox with front camber plates - BMW 5 (E28)
1 1

MTS Technik

MTS Technik koiloveri Street Inox with front camber plates - BMW 5 (E28)

MTS Technik koiloveri Street Inox with front camber plates - BMW 5 (E28)

XMTSGWBM32

€1.279,00 EUR
€1.279,00 EUR
Akcija Nav noliktavā, raksti siadkracing@gmail.com, lai pasūtītu.
ar PVN. Piegāde tiek aprēķināta apmaksas laikā
Front strut diameter

MTS Technik Street coilover kit with Inox housing, with front camber plates, for BMW 5 (E28).

SeriesStreet
HousingInox
Camber platesfront
Lowering front25 - 110 mm
Lowering rear25 - 90 mm
TÜVno
Please note — by version:
  • Ø52 mm (XMTSGWBM32): strut diameter at the front axle of 52 mm
  • Ø55 mm (XMTSGWBM19): strut diameter at the front axle of 55 mm

Specifications

Series Street
Housing Inox
Camber plates / top mounts Front camber plates
Lowering front 25 - 110 mm
Lowering rear 25 - 90 mm
Max. axle load front? max 930 kg
Max. axle load rear? max 1030 kg
Main spring rate GWFE93 (70 N/mm)
GWFE97 (60 N/mm)
Helper spring rate GWHE02 (20 N/mm)
TÜV certificate no

Versions

Part number Front strut diameter
XMTSGWBM32 Ø52 mm
XMTSGWBM19 Ø55 mm

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Front strut diameter.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
518 / 518 i / 520 i / 524 d / 524 td / 525 e / 525 i / 528 i / 535 i
 05/81 - 12/87
63 - 162 kW / 86 - 220 HP
RWD

Features

Eibach springs
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Stainless steel threaded shock absorbers.Stainless steel threaded shock absorbers.
Top mounts with camber adjustment
Top mounts with camber adjustmentThe camber plates allow the wheel angle adjustment and increase the precision of driving.
2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perch
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Independent height adjustment at the bottom mounting
Independent height adjustment at the bottom mountingAdditional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.
Twin-tube construction
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technology
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

2Front and rear axle height adjustable (threaded shock absorber housing).
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
26Independent height adjustment at the lower brackets on the front dampers.
28The kit includes 2 upper front camber plates.
29The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
32In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
33Including M-Technik.
65Suspension compatible only with a rear top mount with an internal diameter of 78mm - OEM number: 33521117657 or 33521126987. It is possible to mount the suspension to cars equipped with other top mounts, but original parts marked with one of the above numbers will be required.
66In the case of cars equipped with Nivo, it will be required to replace the rear top mounts with OEM: 33521117657 or 33521126987.

Downloads

For all versions

For each version

Part number · Front strut diameter Documents for this version
XMTSGWBM32Ø52 mm
PDFSpare part list
XMTSGWBM19Ø55 mm
PDFSpare part list
Skatīt pilnu informāciju