• MTS Technik pazeminošās atsperes - Seat LEON (1M) (FWD, 1.4 16V / 1.6 / 1.6 16 V)
1 1

MTS Technik

MTS Technik pazeminošās atsperes - Seat LEON (1M) (FWD, 1.4 16V / 1.6 / 1.6 16 V)

MTS Technik pazeminošās atsperes - Seat LEON (1M) (FWD, 1.4 16V / 1.6 / 1.6 16 V)

MTSXSE122

€159,00 EUR
€159,00 EUR
Akcija Nav noliktavā, raksti siadkracing@gmail.com, lai pasūtītu.
ar PVN. Piegāde tiek aprēķināta apmaksas laikā
Axle
Lowering

MTS Technik lowering springs for Seat LEON (1M) — available as full set / front axle / rear axle.

Axlefull set / front / rear
Lowering front30 - 45 mmby version
Lowering rear30 - 45 mmby version
TÜVyes

Specifications

Product Lowering springs
Max. axle load rear? -
TÜV certificate yes

Versions

Part number Axle Lowering Max. axle load front?
MTSXSE122 Full set 30 mm -
MTSXSE062 Full set 45 mm max 950 kg
MTSXSE122VA Front axle 30 mm -
MTSXSE062VA Front axle 45 mm max 950 kg
MTSXSE122HA Rear axle 30 mm -
MTSXSE062HA Rear axle 45 mm max 950 kg

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Axle / Lowering.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
1.4 16V / 1.6 / 1.6 16 V
 01/00 - 08/05
55 - 77 kW / 75 - 105 HP
FWD

Features

2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Features by version

The same lowering for both axles
The same lowering for both axlesThe same lowering for both axles maximizes driving precision and guarantees a sporty look without sacrificing comfort.Axle: Full set
Mounting on OEM shock absorbers
Mounting on OEM shock absorbersSprings that provide a subtle lowering can be successfully used with OEM shock absorbers.Lowering: 30 mm
Mounting on sports shock absorbers
Mounting on sports shock absorbersSprings with an aggressive lowering, requiring the use of sports shock absorbers with a shorter stroke.Lowering: 45 mm

Product notes

109In case of additional, non-standard equipment (e.g. tow hook, LPG installation) the actual lowering of the car might be different from declared.

Notes by version

M45We recommend to use shortend shock absorbers for this set.
Lowering: 45 mm
M69TÜV only suitable with normal original bumpstop or sport original bumpstop. Do not shorten the bumpstops!! With the sport bumpstop the lowering will be a little more and also the driving will be better.
Lowering: 45 mm

Downloads

Part number · Axle / Lowering Documents for this version
MTSXSE122Full set, 30 mm
PDFTÜV Certificate
MTSXSE062Full set, 45 mm
PDFTÜV Certificate
MTSXSE122VAFront axle, 30 mm
no documents
MTSXSE062VAFront axle, 45 mm
no documents
MTSXSE122HARear axle, 30 mm
no documents
MTSXSE062HARear axle, 45 mm
no documents
Skatīt pilnu informāciju