MTS Technik
MTS Technik koiloveri Stance Gold - BMW 5 Touring (E39)
MTS Technik koiloveri Stance Gold - BMW 5 Touring (E39)
SKU:MTSGWBM35-S
Regular price
€799,00 EUR
Regular price
Sale price
€799,00 EUR
Taxes included.
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
MTS Technik Stance coilover kit with Gold housing for BMW 5 Touring (E39).
SeriesStance
HousingGold
Camber platesno
Lowering front20 - 70 mm
Lowering rear10 - 40 mmby version (front-only kit: no change)
TÜVyes
Please note — by version:
- Complete kit – rear springs (NIVO conversion possible) (MTSGWBM35-S): Dedicated for cars with and without nivo. It enables conversion from nivo to springs with height adjustment.
- Front axle only – for cars with NIVO (MTSGWBM33-S): only versions with NIVO
Specifications
| Series | Stance |
| Housing | Gold |
| Camber plates / top mounts | Without |
| Lowering front | 20 - 70 mm |
| TÜV certificate | yes |
Versions
| Part number | Configuration | Max. axle load front? | Max. axle load rear? | Lowering rear | Main spring rate | Helper spring rate |
|---|---|---|---|---|---|---|
| MTSGWBM35-S | Complete kit – rear springs (NIVO conversion possible) |
max 1095 kg | max 1410 kg | 10 - 40 mm |
GWFE103 (90 N/mm) GWFE190 (120 N/mm) |
GWHE02 (20 N/mm) GWHE24 (5,66 N/mm) |
| MTSGWBM33-S | Front axle only – for cars with NIVO |
max 1090 kg | - | no change (front axle only) | GWFE103 (90 N/mm) | GWHE02 (20 N/mm) |
Vehicle fitment
All versions fit the vehicles listed below. Choose the version by Configuration.
?How to check the axle loads of your car
Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.
| Vehicle / engine | Years · power · drive |
|---|---|
520 d / 520 i / 523 i / 525 d / 525 i / 525 tds / 528 i / 530 d / 530 i / 540 i |
09/96 - 06/04 100 - 210 kW / 136 - 286 HP RWD |
Features
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Anti-corrosion protection yellow galvanizedDouble zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.
Features by version
Lowering only the front axleA set that provides lowering only the front axle.Configuration: Front axle only – for cars with NIVO
Product notes
8Not for 4x4.
12Only for vehicles without EDC.
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
118Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196).
Notes by version
73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.
Configuration: Complete kit – rear springs (NIVO conversion possible)
Configuration: Complete kit – rear springs (NIVO conversion possible)
Downloads
For all versions
For each version
| Part number · Configuration | Documents for this version |
|---|---|
MTSGWBM35-SComplete kit – rear springs (NIVO conversion possible)
|
PDFSpare part listPDFTÜV Certificate |
MTSGWBM33-SFront axle only – for cars with NIVO
|
PDFSpare part listPDFTÜV Certificate |
