MTS Technik

MTS Technik koiloveri Stance Gold with front camber plates + rear top mounts - BMW 3 / 3 Touring / 3 Convertible (E30)

SKU:MTSGWBM105-S

€949,00 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

Front strut diameter Ø45 mm Ø51 mm

MTS Technik Stance coilover kit with Gold housing, with front camber plates and rear top mounts, for BMW 3 / 3 Touring / 3 Convertible (E30).

SeriesStance

HousingGold

Camber platesfront + rear top mounts

Lowering front25 - 90 mm

Lowering rear10 - 50 mm

TÜVno

Please note — by version:

Ø45 mm (MTSGWBM105-S): strut diameter at the front axle of 45 mm
Ø51 mm (MTSGWBM102-S): strut diameter at the front axle of 51 mm

Specifications

Series	Stance
Housing	Gold
Camber plates / top mounts	Front camber plates + rear top mounts
Lowering front	25 - 90 mm
Lowering rear	10 - 50 mm
Max. axle load front?	max 865 kg
Max. axle load rear?	max 1030 kg
Main spring rate	GWFE81 (80 N/mm) GWFE112 (260 N/mm)
Helper spring rate	GWHE01 (20 N/mm) GWHE02 (20 N/mm)
TÜV certificate	no

Versions

Part number	Front strut diameter
MTSGWBM105-S	Ø45 mm
MTSGWBM102-S	Ø51 mm

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Front strut diameter.

?How to check the axle loads of your car

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine	Years · power · drive
3 (E30)315 / 316 / 316 i / 318 i / 318 is / 320 i / 323 i / 324 d / 324 td / 325 e 2.7 / 325 i	09/82 - 03/92 55 - 126 kW / 75 - 171 HP RWD
3 Convertible (E30)318 i / 320 i / 325 i	09/82 - 11/93 83 - 126 kW / 113 - 171 HP RWD
3 Touring (E30)316 i / 318 i / 320 i / 324 td / 325 i	07/87 - 10/94 73 - 125 kW / 100 - 170 HP RWD

Features

Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.

Anti-corrosion protection yellow galvanizedDouble zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.

Top mounts with camber adjustmentThe camber plates allow the wheel angle adjustment and increase the precision of driving.

2 years warranty2 year warranty with no mileage limit to confirm high quality.

hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

Set also includes Sway Bar LinksA complete set ready for assembly, also including sway bar links, adapted for lowering.

Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.

Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

8Not for 4x4.

21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

26Independent height adjustment at the lower brackets on the front dampers.

28The kit includes 2 upper front camber plates.

29The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.

33Including M-Technik.

35Rear thread adjustment block is mounted on the top.

73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.