• MTS Technik koiloveri Stance Inox with front camber plates - BMW 5 (E60)
1 1

MTS Technik

MTS Technik koiloveri Stance Inox with front camber plates - BMW 5 (E60)

MTS Technik koiloveri Stance Inox with front camber plates - BMW 5 (E60)

XMTSGWBM106-S

€1.199,00 EUR
€1.199,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.
Configuration

MTS Technik Stance coilover kit with Inox housing, with front camber plates, for BMW 5 (E60).

SeriesStance
HousingInox
Camber platesfront
Lowering front40 - 85 mm
Lowering rear25 - 80 mmby version (front-only kit: no change)
TÜVno

Specifications

Series Stance
Housing Inox
Camber plates / top mounts Front camber plates
Lowering front 40 - 85 mm
Max. axle load front? max 1070 kg
Max. axle load rear? max 1235 kg
Helper spring rate GWHE02 (20 N/mm)
TÜV certificate no

Versions

Part number Configuration Lowering rear Main spring rate
XMTSGWBM106-S Complete kit 25 - 80 mm GWFE16VA (86 - 105 N/mm)
GWFE103 (90 N/mm)
XMTSGWBM110-S Front axle only no change (front axle only) GWFE103 (90 N/mm)

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Configuration.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
520 d / 520 i / 523 i / 525 d / 525 i / 530 d / 530 i / 535 d / 540 i / 545 i / 550 i
 12/01 - 03/10
110 - 270 kW / 150 - 367 HP
RWD

Features

Eibach springs
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Stainless steel threaded shock absorbers.Stainless steel threaded shock absorbers.
Top mounts with camber adjustment
Top mounts with camber adjustmentThe camber plates allow the wheel angle adjustment and increase the precision of driving.
2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perch
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Twin-tube construction
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technology
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Features by version

Set also includes Sway Bar Links
Set also includes Sway Bar LinksA complete set ready for assembly, also including sway bar links, adapted for lowering.Configuration: Front axle only

Product notes

8Not for 4x4.
12Only for vehicles without EDC.
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

Notes by version

2Front and rear axle height adjustable (threaded shock absorber housing).
Configuration: Complete kit
9Only for vehicles without NIVO / OEM pneumatic suspension.
Configuration: Complete kit
28The kit includes 2 upper front camber plates.
Configuration: Front axle only
73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.
Configuration: Complete kit

Downloads

For all versions

For each version

Part number · Configuration Documents for this version
XMTSGWBM106-SComplete kit
PDFSpare part list
XMTSGWBM110-SFront axle only
PDFSpare part list
View full details