• MTS Technik koiloveri Street Gold - Audi A6 C6 / A6 C6 Avant (4F)
  • MTS Technik koiloveri Street Gold - Audi A6 C6 / A6 C6 Avant (4F)
1 2

MTS Technik

MTS Technik koiloveri Street Gold - Audi A6 C6 / A6 C6 Avant (4F)

MTS Technik koiloveri Street Gold - Audi A6 C6 / A6 C6 Avant (4F)

MTSGWAU50

€649,00 EUR
€649,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.
Front axle load

MTS Technik Street coilover kit with Gold housing for Audi A6 C6 / A6 C6 Avant (4F).

SeriesStreet
HousingGold
Camber platesno
Lowering front30 - 65 mm
Lowering rear20 - 50 mm
TÜVyes

Specifications

Series Street
Housing Gold
Camber plates / top mounts Without
Lowering front 30 - 65 mm
Lowering rear 20 - 50 mm
Max. axle load rear? max 1335 kg
Helper spring rate GWHE02 (20 N/mm)
TÜV certificate yes

Versions

Part number Front axle load Main spring rate
MTSGWAU50 max 1240 kg GWFE10VA (122 N/mm)
GWFE31HA (115 N/mm)
MTSGWAU51 1241-1305 kg GWFE24VA (150 N/mm)
GWFE31HA (115 N/mm)

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Front axle load — the permissible axle loads are on the rating plate of your car.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
A6 C6 (4F)2.0 TDI / 2.0 TFSI / 2.4 / 2.7 TDI / 2.8 FSI / 2.8 V6 / 3.0 / 3.2 FSI
04/04 - 08/11
89 - 195 kW / 121 - 265 HP
FWD
A6 C6 (4F)2.4 quattro / 2.7 TDI quattro / 2.8 FSI quattro / 3.0 quattro / 3.0 TDI quattro / 3.0 TFSI quattro / 3.2 FSI quattro / 4.2 FSI quattro / 4.2 quattro / S6 quattro
04/04 - 08/11
120 - 320 kW / 163 - 435 HP
AWD
A6 C6 Avant (4F)2.0 TDI / 2.0 TFSI / 2.4 / 2.7 TDI / 2.8 FSI / 3.0 / 3.2 FSI
11/04 - 08/11
89 - 188 kW / 121 - 255 HP
FWD
A6 C6 Avant (4F)2.4 quattro / 2.7 TDI quattro / 2.8 FSI quattro / 3.0 quattro / 3.0 TDI quattro / 3.0 TFSI quattro / 3.2 FSI quattro / 4.2 FSI quattro / 4.2 quattro / S6 quattro
11/04 - 08/11
120 - 320 kW / 163 - 435 HP
AWD

Features

Eibach springs
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Anti-corrosion protection yellow galvanized
Anti-corrosion protection yellow galvanizedDouble zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perch
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Twin-tube construction
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technology
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
17Only for vehicles without electronic damping.
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
35Rear thread adjustment block is mounted on the top.
73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.

Downloads

For all versions

For each version

Part number · Front axle load Documents for this version
MTSGWAU50max 1240 kg
PDFSpare part list
MTSGWAU511241-1305 kg
PDFSpare part list
View full details