MTS Technik

MTS Technik koiloveri Street Gold - Audi Q3 / Q3 Sportback (F3) (multilink rear axle, AWD)

Name: MTS Technik koiloveri Street Gold - Audi Q3 / Q3 Sportback (F3) (multilink rear axle, AWD)
Brand: MTS Technik
SKU: MTSGWVW18
Price: 749.00 EUR
Availability: InStock

SKU:MTSGWVW18

€749,00 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

MTS Technik Street coilover kit with Gold housing for Audi Q3 / Q3 Sportback (F3).

SeriesStreet

HousingGold

Camber platesno

Lowering front20 - 40 mm

Lowering rear20 - 45 mm

TÜVyes

Please note: multilink rear suspension

Specifications

Part number	MTSGWVW18
Series	Street
Housing	Gold
Camber plates / top mounts	Without
Lowering front	20 - 40 mm
Lowering rear	20 - 45 mm
Max. axle load front?	max 1240 kg
Max. axle load rear?	max 1150 kg
Main spring rate	GWFE273VA (45 N/mm) GWFE274HA (55 N/mm)
TÜV certificate	yes

Vehicle fitment

This product fits every vehicle listed below.

?How to check the axle loads of your car

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine	Years · power · drive
Q3 (F3)2.5 RS quattro / 35 TDI quattro / 40 TDI quattro / 40 TFSI quattro / 45 TFSI quattro	07/18 - 110 - 294 kW / 150 - 400 HP AWD
Q3 Sportback (F3)2.5 RS quattro / 35 TDI quattro / 40 TDI quattro / 40 TFSI quattro / 45 TFSI quattro	06/19 - 110 - 294 kW / 150 - 400 HP AWD

Features

Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.

Anti-corrosion protection yellow galvanizedDouble zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.

2 years warranty2 year warranty with no mileage limit to confirm high quality.

hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.

Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

2Front and rear axle height adjustable (threaded shock absorber housing).

21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

52Only suitable for multilink suspension.

73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.

136In vehicles where the lower spring seat is integrated with the spring and cannot be removed, the lower spring seat VW part number 5Q0 512 297 F must be used.