• MTS Technik koiloveri Street Inox - Volkswagen POLO V (6R1/6C1)
1 1

MTS Technik

MTS Technik koiloveri Street Inox - Volkswagen POLO V (6R1/6C1)

MTS Technik koiloveri Street Inox - Volkswagen POLO V (6R1/6C1)

XMTSGWVW46

€819,00 EUR
€819,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

MTS Technik Street coilover kit with Inox housing for Volkswagen POLO V (6R1/6C1).

SeriesStreet
HousingInox
Camber platesno
Lowering front15 - 60 mm
Lowering rear15 - 60 mm
TÜVyes
Please note: For 1J0412331 top mount

Specifications

Part number XMTSGWVW46
Series Street
Housing Inox
Camber plates / top mounts Without
Lowering front 15 - 60 mm
Lowering rear 15 - 60 mm
Max. axle load front? max 960 kg
Max. axle load rear? max 840 kg
Main spring rate GWFE96 (60 N/mm)
GWFE12HA (17 - 27 - 37,5 N/mm)
Helper spring rate GWHE01 (20 N/mm)
TÜV certificate yes

Vehicle fitment

This product fits every vehicle listed below.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
1.0 / 1.0 TSI / 1.2 / 1.2 TDI / 1.2 TSI / 1.2 TSI 16V / 1.4 (6R1) / 1.4 BiFuel / 1.4 GTI / 1.4 TDI / 1.4 TSI / 1.6 / 1.6 BiFuel / 1.6 TDI / 1.8 GTI / 1.8 GTI 230 / 2.0 R WRC
 03/09 - 06/22
44 - 169 kW / 60 - 230 HP
FWD

Features

Eibach springs
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Stainless steel threaded shock absorbers.Stainless steel threaded shock absorbers.
2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perch
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Twin-tube construction
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technology
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
36Rear thread adjustment block is mounted on the bottom.
39Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.

Downloads

View full details