MTS Technik

MTS Technik koiloveri Street Inox with front camber plates - Audi 80 B4 Avant / 80 B4 Saloon (8C) (AWD)

Name: MTS Technik koiloveri Street Inox with front camber plates - Audi 80 B4 Avant / 80 B4 Saloon (8C) (AWD)
Brand: MTS Technik
SKU: XMTSGWAU72
Price: 1539.00 EUR
Availability: InStock

SKU:XMTSGWAU72

€1.539,00 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

MTS Technik Street coilover kit with Inox housing, with front camber plates, for Audi 80 B4 Avant / 80 B4 Saloon (8C).

SeriesStreet

HousingInox

Camber platesfront

Lowering front15 - 65 mm

Lowering rear15 - 65 mm

TÜVyes

Specifications

Part number	XMTSGWAU72
Series	Street
Housing	Inox
Camber plates / top mounts	Front camber plates
Lowering front	15 - 65 mm
Lowering rear	15 - 65 mm
Max. axle load front?	max 1100 kg
Max. axle load rear?	max 1120 kg
Main spring rate	GWFE96 (60 N/mm) GWFE20HA (40 - 80 N/mm)
Helper spring rate	GWHE02 (20 N/mm)
TÜV certificate	yes

Vehicle fitment

This product fits every vehicle listed below.

?How to check the axle loads of your car

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine	Years · power · drive
80 B4 Avant (8C)2.0 E 16V quattro / 2.0 quattro / 2.3 E quattro / 2.6 quattro / 2.8 quattro / RS2 quattro / S2 quattro	09/91 - 01/96 79 - 232 kW / 107 - 315 HP AWD
80 B4 Saloon (8C)2.0 E 16V quattro / 2.0 E quattro / 2.3 E quattro / 2.6 quattro / 2.8 quattro / S2 quattro	09/91 - 07/95 85 - 169 kW / 115 - 230 HP AWD

Features

Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.

Stainless steel threaded shock absorbers.Stainless steel threaded shock absorbers.

Top mounts with camber adjustmentThe camber plates allow the wheel angle adjustment and increase the precision of driving.

2 years warranty2 year warranty with no mileage limit to confirm high quality.

hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.

Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

2Front and rear axle height adjustable (threaded shock absorber housing).

21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

28The kit includes 2 upper front camber plates.