Skip to product information
1 of 1

MTS Technik

MTS Technik koiloveri Street Inox with front camber plates - BMW 5 (E12) (original struts required)

MTS Technik koiloveri Street Inox with front camber plates - BMW 5 (E12) (original struts required)

SKU:XMTSGWBM97

Regular price €1.359,00 EUR
Regular price Sale price €1.359,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.
Years
Quantity

MTS Technik Street coilover kit with Inox housing, with front camber plates, for BMW 5 (E12).

SeriesStreet
HousingInox
Camber platesfront
Lowering front25 - 100 mm
Lowering rear45 - 140 mm
TÜVno

Specifications

Series Street
Housing Inox
Camber plates / top mounts Front camber plates
Lowering front 25 - 100 mm
Lowering rear 45 - 140 mm
Max. axle load front? max 940 kg
Max. axle load rear? max 1010 kg
Main spring rate GWFE96 (60 N/mm)
GWFE205 (50 N/mm)
Helper spring rate GWHE02 (20 N/mm)
TÜV certificate no

Versions

Part number Years
XMTSGWBM97 03/72 - 08/76
XMTSGWBM95 09/76 - 08/81

Vehicle fitment

Each version fits the vehicles listed below within its production years. Choose the version by Years.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
518 / 520 / 520/6 / 520 i / 525 / 528 / 528 i / M535 i
03/72 - 08/76
66 - 160 kW / 90 - 218 HP
RWD
518 / 520 / 520/6 / 520 i / 525 / 528 / 528 i / M535 i
09/76 - 08/81
66 - 160 kW / 90 - 218 HP
RWD

Features

Eibach springs
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Stainless steel threaded shock absorbers.Stainless steel threaded shock absorbers.
Top mounts with camber adjustment
Top mounts with camber adjustmentThe camber plates allow the wheel angle adjustment and increase the precision of driving.
2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perch
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Independent height adjustment at the bottom mounting
Independent height adjustment at the bottom mountingAdditional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.
Twin-tube construction
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technology
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Features by version

Radical lowering
Radical loweringA set for radical tuning with a significant reduction and strongly sport characteristics.Years: 03/72 - 08/76

Product notes

2Front and rear axle height adjustable (threaded shock absorber housing).
9Only for vehicles without NIVO / OEM pneumatic suspension.
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
26Independent height adjustment at the lower brackets on the front dampers.
28The kit includes 2 upper front camber plates.
33Including M-Technik.
64After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged.
68After welding the customer-supplied axle struts and MTS Technik coilover suspension, the product is personalized according to the customer's needs. Thus, the right to withdraw from the conclusion of a distance sales contract is excluded (no possibility of returning the goods).
69The axle struts delivered to us will be cleaned of paint, welded and then secured with zinc. Please provide the original axle struts with the original paint, even if it is in poor condition. Please do not paint the axle struts before shipping!
133Available for delivery only within the European Union.

Notes by version

8Not for 4x4.
Years: 09/76 - 08/81
17Only for vehicles without electronic damping.
Years: 09/76 - 08/81
65Suspension compatible only with a rear top mount with an internal diameter of 78mm - OEM number: 33521117657 or 33521126987. It is possible to mount the suspension to cars equipped with other top mounts, but original parts marked with one of the above numbers will be required.
Years: 03/72 - 08/76
66In the case of cars equipped with Nivo, it will be required to replace the rear top mounts with OEM: 33521117657 or 33521126987.
Years: 03/72 - 08/76

Downloads

For all versions

For each version

Part number · Years Documents for this version
XMTSGWBM9703/72 - 08/76
PDFSpare part list
XMTSGWBM9509/76 - 08/81
PDFSpare part list
View full details