MTS Technik

MTS Technik koiloveri Street Inox with front camber plates - Mercedes-Benz CLA Coupe (C117) (FWD)

Name: MTS Technik koiloveri Street Inox with front camber plates - Mercedes-Benz CLA Coupe (C117) (FWD)
Brand: MTS Technik
SKU: XMTSGWMB28
Price: 1049.00 EUR
Availability: InStock

SKU:XMTSGWMB28

€1.049,00 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

MTS Technik Street coilover kit with Inox housing, with front camber plates, for Mercedes-Benz CLA Coupe (C117).

SeriesStreet

HousingInox

Camber platesfront

Lowering front25 - 55 mm

Lowering rear30 - 60 mm

TÜVyes

Specifications

Part number	XMTSGWMB28
Series	Street
Housing	Inox
Camber plates / top mounts	Front camber plates
Lowering front	25 - 55 mm
Lowering rear	30 - 60 mm
Max. axle load front?	max 1140 kg
Max. axle load rear?	max 1010 kg
Main spring rate	GWFE66VA (50 N/mm) GWFE69HA (63 N/mm)
TÜV certificate	yes

Vehicle fitment

This product fits every vehicle listed below.

?How to check the axle loads of your car

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine	Years · power · drive
CLA 180 (117.342) / CLA 180 CDI / d (117.312) / CLA 200 / CLA 200 (117.343) / CLA 200 CDI (117.301) / CLA 200 CDI / d (117.308) / CLA 220 (117.345) / CLA 220 CDI / d (117.303) / CLA 250 (117.344) / CLA 250 (117.350)	01/13 - 03/19 80 - 160 kW / 109 - 218 HP FWD

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

17Only for vehicles without electronic damping.

21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

28The kit includes 2 upper front camber plates.

35Rear thread adjustment block is mounted on the top.

73For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.