• MTS Technik koiloveri Street Inox with front camber plates + rear top mounts - Audi 100 C3 Avant / 200 C3 Avant / 100 C3
  • MTS Technik koiloveri Street Inox with front camber plates + rear top mounts - Audi 100 C3 Avant / 200 C3 Avant / 100 C3
  • MTS Technik koiloveri Street Inox with front camber plates + rear top mounts - Audi 100 C3 Avant / 200 C3 Avant / 100 C3
  • MTS Technik koiloveri Street Inox with front camber plates + rear top mounts - Audi 100 C3 Avant / 200 C3 Avant / 100 C3
1 4

MTS Technik

MTS Technik koiloveri Street Inox with front camber plates + rear top mounts - Audi 100 C3 Avant / 200 C3 Avant / 100 C3 Saloon / 200 C3 Saloon (44) (FWD)

MTS Technik koiloveri Street Inox with front camber plates + rear top mounts - Audi 100 C3 Avant / 200 C3 Avant / 100 C3 Saloon / 200 C3 Saloon (44) (FWD)

XMTSGWAU64

€1.359,00 EUR
€1.359,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

MTS Technik Street coilover kit with Inox housing, with front camber plates and rear top mounts, for Audi 100 C3 Avant / 200 C3 Avant / 100 C3 Saloon / 200 C3 Saloon (44).

SeriesStreet
HousingInox
Camber platesfront + rear top mounts
Lowering front15 - 100 mm
Lowering rear15 - 85 mm
TÜVno

Specifications

Part number XMTSGWAU64
Series Street
Housing Inox
Camber plates / top mounts Front camber plates + rear top mounts
Lowering front 15 - 100 mm
Lowering rear 15 - 85 mm
Max. axle load front? max 1240 kg
Max. axle load rear? max 1200 kg
Main spring rate GWFE84 (70 N/mm)
GWFE97 (60 N/mm)
Helper spring rate GWHE01 (20 N/mm)
GWHE24 (5,66 N/mm)
TÜV certificate no

Vehicle fitment

This product fits every vehicle listed below.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
100 C3 Avant (44)1.8 / 1.9 / 2.0 / 2.0 D / 2.0 E / 2.0 E Cat / 2.0 TD / 2.1 / 2.2 / 2.2 Cat / 2.3 / 2.4 D / 2.5 TDI
08/82 - 11/90
51 - 101 kW / 70 - 137 HP
FWD
100 C3 Saloon (44)1.8 / 1.8 Cat / 1.9 / 2.0 / 2.0 Cat / 2.0 D / 2.0 D Turbo / 2.1 / 2.2 / 2.2 Cat / 2.3 E / 2.4 D / 2.5 TDI
08/82 - 07/91
51 - 101 kW / 70 - 137 HP
FWD
200 C3 Avant (44)2.2 Turbo
09/83 - 12/91
121 kW / 165 HP
FWD
200 C3 Saloon (44)2.1 5E / 2.1 Turbo / 2.2 / 2.2 Turbo
06/83 - 12/91
100 - 147 kW / 136 - 200 HP
FWD

Features

Stainless steel threaded shock absorbers.
Stainless steel threaded shock absorbers.Stainless steel threaded shock absorbers.

Product notes

2Front and rear axle height adjustable (threaded shock absorber housing).
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
28The kit includes 2 upper front camber plates.
29The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
63The adjustment range may be different depending on the vehicle version, the lowering or the accuracy of welding of the suspension components.

Downloads

View full details